61-900040-000 Rev. Date: 01/22 4-1
Section 4
MAINTENANCE AND ADJUSTMENTS
By performing the simple, periodic maintenance procedures given in this section, the
Phoenix LT4 Lane Machine will be kept in good working order to produce high quality lane
conditioning.
In addition to the periodic maintenance procedures, this section also contains information
about how to adjust and test the machine’s performance and how to replace the parts that
wear out from normal use.
4.1 PERFORMING AFTER-USE MAINTENANCE
After completing a conditioning session, the Phoenix LT4 Lane Machine should be cleaned
by performing the maintenance tasks listed below. Performing these tasks will prepare the
Phoenix LT4 for the next conditioning session.
NOTES
It is recommended that the tasks are performed in the order listed, but they can be
performed in any order.
When cleaning the machine, it is important that oil does not get into the
cleaning components of the machine and that cleaning solution does not get
into the oiling components of the machine.
Always ensure the Phoenix LT4 Lane Machine is
disconnected from any power source before starting
any maintenance, replacement, or repair task.
To Next Page
Loading...
Need help?
General