2 System requirements
2.1 Hardware
Before you can start using the CONNECT device, you must supply the
device with power. The CONNECT and CONNECT II devices can be
supplied with power via the included 24V DC power plug or via the mini-
USB socket (only for standard CONNECT devices). The CONNECT-
CONTROL, on the other hand, is powered via the included power supply.
Make sure that the WLAN and, depending on the device, the LTE and
GPS antenna(s) are screwed onto the SMA sockets of the device and
then connect the router, PC and peripheral devices using LAN cables to
the device according to your configuration. When using the LTE
connection, insert the SIM card into the slot provided.
Depending on the configuration, you can then access the device via one
of the LAN, WLAN and/or USB-LAN interfaces (optionally available as an
adapter, but not with the CONNECT-LTE or CONNECT-CONTROL
device).
2.2 software
You only need one to access the web server to check the status and
configure the deviceInternet browser (e.g. Microsoft Internet Explorer,
Mozilla FirefoxorGoogle Chrome).The use of the device is independent
of the operating system and browser of the respective computer, tablet
or cell phone.
Important:
In order to display the website correctly, please ensure that JavaScript is
activated in your browser.
Handbook CONNECT / CONNECT-II / CONNECT-CONTROL V1.13 Page 6
To Next Page
Loading...
Need help?
General