1 General
1.1 To the manual
This manual describes the devices of theCONNECT -Family, hereinafter
also simply referred to as a device.
The CONNECT and CONNECT-II devices are each available in a
standard version and as a variant with an integrated LTE modem. The
CONNECT devices are also available in both versions in a table and top-
hat rail housing. The range of functions of the devices depends on the
installed options, which can also be combined. When delivered, the
devices are available with the option of router, remote maintenance and
IP switch. For a description of the options, please refer to the section “3.3
Using the device“.
The CONNECT-CONTROL device includes all the functions of the
remote maintenance option and also has GPS and integrated digital and
analog IO ports to take on smaller control and reporting tasks.
This documentation can be downloaded from the product website under
DownloadsDocumentation can be downloaded.
The manual is aimed at the following user groups:
• planner
• operator
• Commissioning engineer
• Service and maintenance personnel
Before using the device, be sure to read the manual.
If you have any questions and/or problems, please contact your sales
partner's technical support.
Page 5 Handbook CONNECT / CONNECT-II / CONNECT-CONTROL V1.13
To Next Page
Loading...