A notice:
Depending on the installed options, the configuration and the status of
the device, not all dialogs may be available.
4.3.3.1 status
The most important information about the device and its connection is
displayed in the “Status” dialog:
Connection: The current status of the device or connection.
Mistake: The last error that occurred in the device.
Device: The name, if any, and the number of the
own device.
Partner device: The name, if any, and the number of the
Device to which you are currently or most recently connected
exists or has passed.
A notice:
If the remote maintenance option is not installed in your device or you do
not use remote access, the text “not used” will be displayed under
“Connection” as soon as the device is ready for operation.
4.3.3.2 device list
By opening the “Device list” dialog, all devices that are in your
CONNECT cloud are automatically retrieved. After a few seconds, a
table with the devices found will be displayed.
About the symbols and , which are displayed in the last column of the
table, you then have the option of establishing a connection to a device
or disconnecting an existing connection.
Page 43 Handbook CONNECT / CONNECT-II / CONNECT-CONTROL V1.13
To Next Page
Loading...
Need help?
General