“CONNECT WiFi”. This network is unencrypted, so you don't need a
password to connect to it.
The CONNECT devices are configured so that a DHCP server is active
on the WLAN interface. If your laptop or tablet is set so that it can be
automatically assigned an IP address using DHCP, no further
configuration is necessary. Otherwise, you will need to switch your laptop
or tablet to DHCP or manually assign it any IP address in the range
192.168.1.2 to 192.168.1.254.
Once you are connected to the CONNECT and your laptop or tablet has
a valid IP address, you can open a web browser. Now enter the IP
address 192.168.1.1 in the address line. You should now see the
commissioning page of the device and can start configuring.
As an alternative to accessing via WLAN, you also have the option of
accessing the device via wired connection. To do this, connect your
computer to the LAN-A socket of the CONNECT device.
The device has the IP address 192.168.2.1 on this interface. You now
have to manually assign any IP address from the range 192.168.2.2 to
192.168.2.254 to your PC so that you can access the device. The
automatic assignment of addresses using DHCP, as is the case with the
WLAN interface, is deactivated by default here for security reasons.
If you have assigned your PC a valid IP address, you can now open a
web browser and enter the IP address 192.168.2.1 in the address line.
You should then see the device's commissioning page.
A notice:
If you have the “Ethernet via USB” adapter, you can also access the
device via this for the standard CONNECT devices and the CONNECT-
II-LTE device. The device has the IP address 192.168.0.1 on the USB
LAN interface and provides IP addresses, as well as the WLAN interface,
using DHCP. Alternatively, you can manually assign your computer an IP
address between 192.168.0.2 and 192.168.0.254.
3.1.2 CONNECT-CONTROL device
With the CONNECT-CONTROL devices, the 3 LAN ports and the WLAN
network created by the device represent a common interface.
Page 9 Handbook CONNECT / CONNECT-II / CONNECT-CONTROL V1.13
To Next Page
Loading...
Need help?
General