Need help?Do you have a question about the PI CONNECT and is the answer not in the manual?
General| Model | PI CONNECT |
|---|---|
| Category | Switch |
| Port Speed | 10/100/1000 Mbps |
| Management | Unmanaged |
| Mounting | Desktop |
| Operating Temperature | 0°C to 40°C |
| Humidity | non-condensing |
| Ports | 8 |
| Power over Ethernet (PoE) | 8 x PoE+ (802.3at) |
Explains how to connect to the device via web interface or specific keywords.
Details accessing CONNECT/CONNECT-II devices via WLAN or wired LAN.
Describes accessing the CONNECT-CONTROL device via LAN or WLAN.
Guides through the initial commissioning page and basic settings.
Sets parameters for networking the device in the CONNECT cloud.
Sets basic networking parameters for the device in the CONNECT cloud.
Configures how the device connects to the internet (CONNECT, GATEWAY, LTE).
Configures interfaces and addresses for devices communicating with the CONNECT device.
Sets the device's operating mode (Bridge or Router) and name.
Sets basic operating mode and name for the Router option.
Configures the WAN interface for internet/WAN connection when in router mode.
Configures how the device connects to the local network (LAN).
Configures the router interface for the device's internet connection.
Configures the peripheral interface for devices to be reached from the router interface.
Explains how to operate the device after configuration.
Explains how to access and communicate with connected network participants.
Details using the device as a bridge or router, and routing between subnets.
Explains how to operate, configure, and check the device status via the web server.
To Next Page