EasyManuals Logo

PI CONNECT User Manual

PI CONNECT
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
4.3.5.7 Proxy settings
In the Proxy Settings” group you have the option of specifying a proxy
server that should be used to establish the Internet connection:
Proxy server: Indicates whether the Internet connection is via a
Proxy server should be established.
Server address: The IP address of the proxy server.
Server port: The TCP port of the proxy server.
(8080 → often used port for proxy servers)
A notice:
These settings are only displayed if GATEWAY is selected as the
connection type, as they are only relevant in this mode.
4.3.5.8 LAN-A / LAN settings
The settings in this group affect the network connection of the device for
the LAN-A interface (for CONNECT and CONNECT-II) or LAN interface
(for CONNECT-CONTROL):
MAC address: The MAC address of the interface (this can be
cannot be changed).
DHCP mode: - The device is over the set
Address available.
Page 59 Handbook CONNECT / CONNECT-II / CONNECT-CONTROL V1.13

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PI CONNECT and is the answer not in the manual?

PI CONNECT Specifications

General IconGeneral
ModelPI CONNECT
CategorySwitch
Port Speed10/100/1000 Mbps
ManagementUnmanaged
MountingDesktop
Operating Temperature0°C to 40°C
Humiditynon-condensing
Ports8
Power over Ethernet (PoE)8 x PoE+ (802.3at)