Need help?Do you have a question about the Polhemus VIPER 4 and is the answer not in the manual?
Provides an overview of the VIPER™ system, its innovations, and models.
Details the core components of the VIPER™ system, including SEU, Sensors, and Sources.
Explains the FTT® (Fly True Technology) feature for real-time magnetic distortion mitigation.
Guides users through the initial hardware setup and connections for the VIPER™ system.
Lists and categorizes the various commands available for configuring and controlling the VIPER™ system.
Details commands for persistent settings that are stored in flash memory.
Describes commands for runtime-only configuration settings.
Explains commands for outputting Position and Orientation data in various formats.
Covers commands used to retrieve system status, diagnostic information, and device identification.
Details commands for performing system-level operations like saving configurations or resetting defaults.
Defines the process of obtaining congruence between system axes and application axes.
Describes the coordinate of orientation tracking in the horizontal plane.
Explains the signaling rate on a serial line for data transmission.
Refers to Built-In Test features for monitoring system health and detecting errors.
To Next Page
General