Polhemus VIPER 4 - Who am Icommand; Sensor Who am Icommand

USER MANUAL
Page 60 of 86 URM18PH392 Rev A. May 2020
WHO AM I COMMAND 4.5.4
This command returns basic identification and firmware version of VIPER™ system.
In VIPER™ Command Manager, to display VIPER™
Who Am I information, click on the VIPER™ SEU
icon in the Status Pane.
Scope: SEU, Get Only
SENSOR WHO AM I COMMAND 4.5.5
This command retrieves the Sensor serial number.
In VIPER™ Command Manager, to display Sensor
Who Am I information, click a sensor icon in
the Status Pane.
Scope: Sensor, Get Only