Ref. Number Description
5 HDMI output for the secondary monitor
6 USB Type-C port for future use
7 USB ports used for the following options:
• USB input for USB cameras
• System upgrade via USB flash drive
8 LAN connection
9 Power
Related Links
Reset Your G200 System on page 45
Poly G200 LED Indicators
Poly G200 uses LED indicators to show basic system status.
LED Color System Status
Blue
• Initializing
• Awake
Blinking blue
• Incoming call
• Remote control pairing
• Booting up
Amber Asleep
Blinking amber Shutting down
Green In a call
Red
• Network disconnected
• Provisioning failed
• SIP not registered
• H.323 not registered
Setting Up the System
9
To Next Page
Loading...
