General System Settings
Topics:
• Define the Device Name
• Deployment Modes
• Set the Date and Time
You can define the G200 system name, configure the system deployment mode, and set the date and
time for your system.
Note: Depending on your deployment, you can configure your system's sleep settings to align with
certain devices in System Settings > General > System Sleeps When Device Is Idle.
Define the Device Name
The device name appears on the screen of the far-end site when you make a call.
Note: You can’t configure the device name when you provision the G200 system.
In SVC mode, you can also define the name at Server Settings > Call Server > Device Name.
Procedure
1. In the system web interface, go to System Settings > General.
2. In the Device Name field, enter the name for your system and select Submit.
Related Links
Configure SVC Call Settings on page 24
Deployment Modes
G200 supports two deployment modes.
• In AVC mode, G200 is a standard H.323/SIP-based video endpoint. It works with the Polycom
RealPresence Clariti solution, standalone Polycom RealPresence Collaboration Servers (RMX), or
any compliant third-party video endpoints or MCUs.
• In SVC mode, G200 is a proprietary video endpoint that adapts H.264 SVC encoding and decoding.
It provides better error resilience and more cost-effectiveness with a high-quality video and audio
experience. The SVC-enabled G200 system is a locked system that works only with the Poly
RealPresence Clariti Ensemble solution.
For more information on the products that work with the different modes, see the Poly G200 Release
Notes .
Related Links
Configure SVC Call Settings on page 24
13
To Next Page
Loading...
Need help?
General
