Configuring Audio Settings
Topics:
• Select the Audio Input
• Enable Polycom NoiseBlock
You can configure audio settings in the G200 system web interface.
The G200 system has one available microphone input.
Related Links
Test Your Audio and Video on page 48
Select the Audio Input
When you connect both the expansion microphone and a USB audio device to your G200 system, you
can select either device for the audio input.
Procedure
1. In the system web interface, go to System Settings > Audio/Video Settings.
2. Do one of the following:
• To set the expansion microphone as the audio input, select the Use Table Microphone
check box.
Note: If you don't connect the expansion microphone, the G200 system doesn't have audio
input.
• To follow the default audio input priority, clear the Use Table Microphone check box.
3. Select Submit.
Enable Polycom NoiseBlock
When you enable Polycom NoiseBlock, the system automatically senses when there is ambient noise in
the room and prevents the noise from transmitting to the far end during video conferences.
Ambient noise can include keyboard typing, paper shuffling, or any sounds other than human speech. As
soon as the near end meeting participant begins speaking, the system sends audio to the far end.
Procedure
1. In the system web interface, go to System Settings > Call Settings.
2. Choose Enable from the Noise Block drop-down list.
34