Import System Settings
You can import G200 system settings from the system web interface.
Procedure
1. In the system web interface, go to System Settings > Import and Export Configuration.
2. Select Choose File and select a .cfg file to import.
3. Select Import to upload the .cfg file to the G200 system.
The G200 system restarts after the file successfully imports.
Export System Settings
You can export G200 settings from the system web interface.
Procedure
1. In the system web interface, go to System Settings > Import and Export Configuration.
2. Select Export and save the downloaded .cfg file to your system.
Restart Your System
If you encounter issues, you can restart your G200 system from the system web interface.
You can find the same button on the local interface by selecting Settings > General from the Home
screen.
Procedure
1. In the system web interface, go to Admin Settings > System Restart.
2. Select Restart.
Reset Your G200 System
If your G200 system isn’t functioning correctly or you forgot the password, you can reset the system.
This procedure effectively refreshes your system, deleting all settings except the current software version.
You can also reset the system from the system web interface in Admin Settings > System Reset.
Procedure
1. Straighten a paper clip and insert it into the restore pinhole.
2. Using the paper clip, press and hold the restore button.
The system reboots after about five seconds.
3. Release the button after the system boots up.
The setup wizard displays.
Related Links
Run the Setup Wizard on page 11
System Panel Views on page 8
System Maintenance
45
To Next Page
Loading...
Need help?
General
