Factory Restore Your System
A factory restore completely erases the system’s flash memory and restores the system to the software
version and default configuration stored in its factory partition.
A factory restore deletes the following items:
• Software updates
• Contacts
• System configurations
• Logs
Procedure
1. Power off the system.
2. Straighten a paper clip and insert it into the reset pinhole.
3. Press and hold the restore button while powering on the system.
4. After the screen shows that system enters the update process, release the reset button.
The system restarts automatically when the process is complete.
Pair the Bluetooth Remote Control
You can manually pair a new remote control to the system when you want to replace the old one.
Procedure
1. Straighten a paper clip and insert it into the restore pinhole.
2. Short press the restore button.
3. Follow the instructions on the screen.
System Maintenance
46
To Next Page
Loading...
Need help?
General
