Poly VVX D230 - Tone Settings

Parameter Reference
100
Tone Settings
The Tone Profile parameters web pages include one page fore each tone profile.
SilenceSuppression Enables silence suppression for this codec. No
PacketizationPeriod Packet size in ms. 20
Priority Priority assigned to this codec (1 is the highest). 2
PayloadType Dynamic Payload type to be used to indicate this event. 109
UseInbandFEC Enables use in band FEC when appropriate. No
Codec Profile X – Telephone Event (VoiceService.1.VoiceProfile.1.Line.n.Codec.X_TelephoneEvent.) n = 1 or
2 corresponding to X = A or B, respectively
Codec Codec Name for this RTP event, as used in SDP. telephone-ev
ent
Enable Enables this codec. Yes
PayloadType Payload type to be used for RFC2833 telephone (DTMF)
events. Valid range is 96–127.
101
Codec Profile X – Encap RTP (VoiceService.1.VoiceProfile.1.Line.n.Codec.X_EncapRTP.) n = 1 or 2
corresponding to X = A or B, respectively
Codec Codec Name. This codec is used to encapsulate RTP
packets during a packet loopback call.
encaprtp
PayloadType Dynamic Payload type for this codec. Valid range is 96–
127.
107
Codec Profile X – Loopback Primer (VoiceService.1.VoiceProfile.1.Line.n.Codec.X_LoopbackPrimer.) n = 1
or 2 corresponding to X = A or B, respectively
Codec Codec name. The device uses this codec when it acts as a
media loopback mirror and before receiving any packets
from the loopback source during a media loopback call.
loopbkprimer
PayloadType Dynamic Payload type for this codec. Valid range is 96–
127.
108
Codec Profile X – Codec Settings (VoiceService.1.VoiceProfile.1.Line.n.Codec.X_Settings.) n = 1 or 2
corresponding to X = A or B, respectively
G726BitPacking Two values to choose from:
• big-endian
• little-endian
big-endian
Codec Profile X Web Page (X = A, B)
Parameter Description Default Setting