Poly VVX D230 Administrator's Guide

Parameter Reference
90
DECT Wireless
The DECT Wireless web page shows parameters for the wireless handset. They include these sets of
pages.
● System Settings
● Registration Settings
● Handsetn (n = 1, 2, ..., 9, 10) Settings
System Settings
The following configuration parameters are available on this page.
System Parameter Guide
Parameter Description Default Setting
System - DECT Base Information (VoiceService.1.X_HS.)
TargetVersion Firmware version.
RFPI Radio fixed part identity of the base.
DectType Displays the DECT device region.
BaseName Name of the base unit.
TargetFW Target firmware file to use. For debugging use only.
TargetFWUpgrade Enables target firmware upgrade. Yes
TargetFWDowngradeAllowed Allow the DECT target firmware to be downgraded when
the full firmware bundle is an older version.
No
IntercomEnable Enables handset intercom function. Yes
Handset Status
HandsetnStatus, n=1-10 Displays the handset status.
Handset Information
HandsetnType, n=1-10 Displays the handset type.
HandsetnIPEI, n=1-10 Displays the handset’s International Portable Equipment
Identity (IPEI).
Handset Firmware
HandsetnFWVersion, n=1-10 Displays the handset firmware version.
HandsetFW Handset firmware file to use. For debugging use only.
HandsetFWDowngradeAllowed Allow handset firmware to be downgraded when the full
firmware bundle is an older version.
No
HandsetnFWUpgrade, n=1-10 Enable handset firmware upgrade. Yes

Poly VVX D230 Specifications

General

Resolution	320 x 240 pixels
Connectivity	DECT
Lines	Up to 8 lines
Audio	HD Voice
Standby Time	Up to 100 hours
Headset Jack	3.5 mm
PoE	No
Bluetooth	No
Wi-Fi	No
Wall Mountable	Yes
Range	980 feet outdoors
Supported Codecs	G.711, G.729, iLBC, Opus
Compatible Platforms	BroadSoft