Parameter Reference
103
Ring Settings
The Ring Profile parameters web pages include one page for each ring profile.
Ring Profile X Web Page (X = A, B)
The following configuration parameters are available on each page.
TonePattern Poly Tone Pattern Script. 914-16,1371-16,1777-16;20;(1/.274+0,
2/.274+0,4/.380+0,0/0+4)
Tone Profile X – SIT Tone 3 (VoiceService.1.VoiceProfile.n.Tone.Description.15.) for n = 1 or 2
corresponding to X = A or B, respectively
ToneName Special Information Tone 3. SIT Tone 3
TonePattern Poly Tone Pattern Script. 914-16,1371-16,1777-16;20;(1/.380+0,
2/.380+0,4/.380+0,0/0+4)
Tone Profile X – SIT Tone 4 (VoiceService.1.VoiceProfile.n.Tone.Description.16.) for n = 1 or 2
corresponding to X = A or B, respectively
ToneName Special Information Tone 4. SIT Tone 4
TonePattern Poly Tone Pattern Script. 985-16,1371-16,1777-16;20;(1/.380+0,
2/.380+0,4/.380+0,0/0+4)
Tone Profile X – Outside Dial Tone (VoiceService.1.VoiceProfile.n.Tone.Description.17.) for n = 1 or 2
corresponding to X = A or B, respectively
ToneName Outside Dial Tone. Outside Dial Tone
TonePattern Obihai Tone Pattern Script. 385-16;10
Tone Profile X – R-Command Tone (VoiceService.1.VoiceProfile.n.Tone.Description.18.) for n = 1 or 2
corresponding to X = A or B, respectively
ToneName R-Command Tone. R-Command Tone
TonePattern Obihai Tone Pattern Script. 400-16;5
Tone Profile X – Paging Tone (VoiceService.1.VoiceProfile.n.Tone.Description.19.) for n = 1 or 2
corresponding to X = A or B, respectively
ToneName Paging Tone. Paging Tone
TonePattern Obihai Tone Pattern Script. 480-16;1;(.2+.2)
Tone Profile A & B Parameter Guide
Parameter Description Default Setting