Parameter Reference
97
Codec Profiles
The Codec Profiles parameters web pages include one page for each codec profile.
Codec Profile X Web Page (X = A, B)
The following configuration parameters are available on each page.
MOHServiceNumber The number to call to get music streamed
to the remote party when the remote
party is placed on hold.
PlaySITOnCallFailureCodes A list of (3-digit) error respons codes on
outbound calls to trigger SIT with optional
announcement of the error. The device
plays fast busy tone without any
announcement for all other call failure
codes. The codes must be specified
collectively as a digit map.
([4-9]xx)
PlaySITWithAnnouncement Enables including announcement of the
error when an outbound call fails.
Yes
Timers (VoiceService.1.X_HS.n.Timer.), n = 1, 2, ..., 9, 10
ReorderDelayTime Delay (in ms) to start reorder tone after
peer ends call.
5500
DigitMapLongTimer Default number (in seconds) when the
digit map processor should timeout
waiting for more digits for matching
patterns with an unspecified length.
10
DigitMapShortTimer Default number (in seconds) when the
digit map processor should timeout
waiting for more digits when at least one
pattern with specific length has matched.
2
Codec Profile X Web Page (X = A, B)
Parameter Description Default Setting
Codec Profile X – G711U Codec (VoiceService.1.VoiceProfile.1.Line.n.Codec.List.1.) n = 1 or 2
corresponding to X = A or B, respectively
Codec Codec name. PCMU
BitRate Bit rate in bits/sec.
Note: Informational only, not configurable.
64000
Handsetn Settings Parameter Guide (n = 1, 2, ..., 9, 10)
Parameter Description Default Setting
To Next Page
Loading...
Need help?
General
