Status Pages
25
SPn Service Status (n = 1–8)
The SPn service status values indicate the current state of the service with regard to its configuration (or
not) and if configured its registration status. If there are problems with the registration or authentication of
the device with a prescribed service, the SIP 4xx error message displays here. Youcan use this information
for troubleshooting issues with SIP-based services.
OBiTALK Service Status
The status of the OBiTALK Service includes the following values:
● Status
Possible values are:
Normal (User Mode): The service is functioning normally.
Backing Off: The service is currently down, and the device is taking a short pause before retrying
the connection.
● CallState
Possible values are:
N Active Calls, where N = 0, 1, .., as many as the maximum number of calls allowed in the
configuration.
Call Status
The Call Status page shows a number of running call statistics and state parameters for each active call
currently in progress.
Call History
The Call History page shows the last 200 calls made with the device. Detailed call information is available,
including what terminals were involved, the name (if available) of the Peer endpoints making the call, and
the direction / path the call took. The Call History page also captures what time various events took place.
9 Reboot from webpage — no change in parameter values or firmware.
10 Reboot during OBiTALK signup.
12 Reboot after DHCP server offers IP, GW-IP, and/or netmask different from what the device is
currently using.
13 Reboot on data networking link re-establishment.
18 Reboot on WAN IP address change.
19 Reboot on LAN IP address change.
Reboot Reason Codes
Reason Code Description
To Next Page
Loading...
Need help?
General
