24
Status Pages
The parameters status pages show read-only values for certain parameters on your device.
System Status
The System Status page is divided into several sections:
● WAN Status
● Product Information
● SPn Service Status (n = 1–8)
● OBiTALK Service Status
WAN Status
The status of the WAN (Ethernet) interface includes information like the assigned IP address, default
gateway, and subnet mask.
Product Information
The product information status shows some basic product information, as well as the system up-time with
the last reboot reason code in parentheses. The reboot reason codes are defined as follows.
Reboot Reason Codes
Reason Code Description
0 Reboot on power cycle.
1 Operating system reboot.
2 Forward upgrade.
3 Reboot after new profile invoked.
4 Reboot after parameter value change or firmware has changed and invoked via device web page.
5 Reboot after factory reset using the device hardware PIN.
6 New profile invoked AND profile URL changed.
7 Reboot from SIP Notify (Reserved).
8 Reboot from telephone port (IVR).
To Next Page
Loading...
Need help?
General
