Poly VVX D230 Administrator's Guide

Parameter Reference
56
System Management Parameters
The System Management parameter web pages show network parameters on your device. They include
these pages:
● WAN Settings
● Auto Provisioning Settings
● Device Admin Settings
● Device Update
WAN Settings
This page lists the Ethernet settings for your device.
WAN Settings
Parameter Description Default Setting
Internet Settings (DeviceInfo.WAN)
AddressingType Method currently used by the handset to get an IP
address assignment.
Example value: DHCP
DHCP
IPAddress IP address currently assigned to the handset when using
static IP addressing.
Example value: 192.168.15.165
SubnetMask Subnet mask to use when using static IP addressing.
Example value: 255.255.255.0
255.255.255.0
DefaultGateway Gateway to use when using static IP addressing.
Example value: 192.168.15.1
DNSServer1 URL for domain name server 1 when using static IP
addressing.
Example value: 8.4.4.4
DNServer2 URL for domain name server 2 when using static IP
addressing.
Example value: 4.2.2.2
VLANEnable VLAN Operation Bool.
VLANID Valid range is 0 - 4094 (4095 is reserved). 0 menas VLAN
is disabled and egress packets are not tagged by the
device. This setting applies to all packets sent by the
device.
0
VLANPriority Valid choices are 0 - 7. This setting applies to all packets
sent by the device.
0

Poly VVX D230 Specifications

General

Resolution	320 x 240 pixels
Connectivity	DECT
Lines	Up to 8 lines
Audio	HD Voice
Standby Time	Up to 100 hours
Headset Jack	3.5 mm
PoE	No
Bluetooth	No
Wi-Fi	No
Wall Mountable	Yes
Range	980 feet outdoors
Supported Codecs	G.711, G.729, iLBC, Opus
Compatible Platforms	BroadSoft