Poly VVX D230 - User Settings

Parameter Reference
106
User Settings
The User Settings parameters web pages include the following pages:
Code13 Default = Block Anonymous Calls Star Code *77, Block Anonymous Call,
set($Bac,1)
Code14 Default = Unblock Anonymous Calls Star Code *87, Unblock Anonymous Call,
set($Bac,0)
Code15 Default = Enable Call Waiting Star Code *56, Enable Call Waiting,
set($Cwa,1)
Code16 Default = Disable Call Waiting Star Code *57, Disable Call Waiting,
set($Cwa,0)
Code17 Default = Do Not Disturb Star Code *78, Do Not Disturb, set($Dnd,1)
Code18 Default = Disable Do Not Disturb Star Code *79, Disable DND, set($Dnd,0)
Code19 Default = Repeat Dial Star Code *66, Repeat Dial, rpdi($Ldn)
Code20 Default = Disable Repeat Dial Star Code *86, Cancel Repeat Dial, rpdi()
Code21 Default = Set Speed Dial Star Code *74([1-9]|[1-9]x), Set Speed Dial,
coll($Spd[$Code])
Code22 Default = Check Speed Dial Star Code *75([1-9]|[1-9]x), Check Speed
Dial, say($Spd[$Code])
Code23 Default = Loopback Media Star Code *03, Loopback Media, set($Lbm1,1)
Code24 Default = Loopback RTP Star Code *04, Loopback RTP Packet,
set($Lbp1,1)
Code25 Default = Force G711u Codec Star Code *4711, Use G711 Only, set($Cdm1,3)
Code26 Default = Force G729 Codec Star Code *4729, Use G729 Only, set($Cdm1,4)
Code27 Default = Clear Speed Dial Star Code *76([1-9]|[1-9]x), Clear Speed
Dial, set($Spd[$Code],)
Code28 Default = Blind Transfer Star Code *98, Blind Transfer, coll($Bxrn)
Code29 Default = Barge In Star Code *96, Barge In, set($Bar1,1)
Code30
Code31
Code32 Default = Force G722 Codec Star Code *4722, Use G722 Only,
set($Cdm1,512)
Code33 Default = Force OPUS Codec Star Code *4678, Use OPUS Only,
set($Cdm1,1024)
Star Code Profile Parameter Guide
Parameter Description Default Setting