Parameter Reference
89
Page Group Settings
The following configuration parameters are available on this page.
AccessNumber The gateway’s OBiTALK number, including trunk information,
such as: PP(ob200112334) or PP(ob200112334)
If the value is blank, the device treats this VG as disabled.
Starting with release 1.2, this can also be set to a SIP URL,
such as:
SP1(sip.mycompany.com:5060) or
SP2(192.168.15.113)
DigitMap DigitMap for this VG. It can be referenced as (Mvgn). (x.x)
AuthUserID A user ID to authenticate with the gateway.
AuthPassword A password to authenticate with the gateway.
Page Groups Parameter Guide
Parameter Description Default Setting
Page Group 1 or 2 (VoiceService.1.X_PageGroup.n.), n = 1, 2
GroupName A user friendly name to label the group on the handset
user interface.
None
MulticastAddress Must be a valid IPv4 Multicast Address. 224.1.1.100
MulticastPort Port to use for multicast. 65322
TTL TTL value of outgoing (multicast) RTP packets. 2
ParticipantName Name to identify this participant to the group. None
AudioCodec Audio codec to use for outgoing page. G711U
TxPacketSize RTP transmission packet size (in ms). 20
RTCPTxInterval RTCP transmission interval (in ms) when talking. 0
SilenceSuppression Enable silence suppression when talking. False
PlayToneOnIncomingPage Play a short paging tone on receiving an incoming page. True
StartTalkingOnJoin Start talking immediately when joining the group. Ture
TalkingAlertTone A short call waiting tone plays periodically to remind you
the device is in talking mode.
CWT10
SwitchToTalkModeDigit Digit to switch from listening mode to talking mode. *
SwitchToListenModeDigit Digit to switch from talking mode to listening mode. #
Gateways Parameter Guide
Parameter Description Default Setting
To Next Page
Loading...
Need help?
General
