10
Configuration and Management
VVX D230 provides the following options to configure and manage your device: Interactive voice response
(IVR) system
● Device local interface
● OBITALK.com system web interface
Configure Your Device Using the IVR System
The VVX D230 device uses the IVR system for both its configuration and normal functionality. Access the
IVR system to receive verbal prompts and information from the device (such as the device IP address).
Note the following information regarding the IVR system:
● If a setting change requires a reboot, the system reboots automatically when you quit the IVR system.
● You can access the next menu of the IVR system or invoke a command without waiting for the
previous announcement to end.
Configure Basic Device Settings
Use the IVR system’s main menu to configure your device’s basic settings or to access additional
configuration menus.
To configure basic device settings:
1 Dial *** from the handset.
2 Enter the number for the configuration menu you want to access.
Menu Selection Setting Description
1 Basic Network Status Device IP address and DHCP status.
2 Advanced Network Status Information on the primary and back-up DNS
server and primary and back-up NTP server.
3 Set DHCP Current DHCP value.
• Press 0 to repeat the information.
• Press 1 to enter a new value.
• Press 2 to set the default value.
To Next Page
Loading...
Need help?
General
