Poly VVX D230 - Tone Profile X Web Page (X = A, B)

Parameter Reference
101
Tone Profile X Web Page (X = A, B)
The following configuration parameters are available on each page.
Tone Profile A & B Parameter Guide
Parameter Description Default Setting
Tone Profile X – Dial Tone (VoiceService.1.VoiceProfile.n.Tone.Description.1.) for n = 1 or 2 corresponding
to X = A or B, respectively
ToneName Dial Tone. Dial Tone
TonePattern Poly Tone Pattern Script. 350-18,440-18;20
Tone Profile X – Ringback Tone (VoiceService.1.VoiceProfile.n.Tone.Description.2.) for n = 1 or 2
corresponding to X = A or B, respectively
ToneName Ringback Tone. Ringback Tone
TonePattern Poly Tone Pattern Script. 440-18,480-18;-1;(2+4)
Tone Profile X – Busy Tone (VoiceService.1.VoiceProfile.n.Tone.Description.3.) for n = 1 or 2 corresponding
to X = A or B, respectively
ToneName Busy Tone. Busy Tone
TonePattern Poly Tone Pattern Script. 480-18,620-18;10;(.5+.5)
Tone Profile X – Reorder Tone (VoiceService.1.VoiceProfile.n.Tone.Description.4.) for n = 1 or 2
corresponding to X = A or B, respectively
ToneName Reorder tone or Fastbusy Tone. Reorder or Fastbusy Tone
TonePattern Poly Tone Pattern Script. 480-18,620-18;10;(.25+.25)
Tone Profile X – Confirmation Tone (VoiceService.1.VoiceProfile.n.Tone.Description.5.) for n = 1 or 2
corresponding to X = A or B, respectively
ToneName Confirmation Tone. Confirmation Tone
TonePattern Obihai Tone Pattern Script. 600-18;1;(.2+.2)
Tone Profile X – Holding Tone (VoiceService.1.VoiceProfile.n.Tone.Description.6.) for n = 1 or 2
corresponding to X = A or B, respectively
ToneName Holding Tone played when peer holding the
call.
Holding Tone
TonePattern Poly Tone Pattern Script. 800-18;30;(.1+10)
Tone Profile X – Second Dial Tone (VoiceService.1.VoiceProfile.n.Tone.Description.7.) for n = 1 or 2
corresponding to X = A or B, respectively
ToneName Second Dial Tone played when dialing
second call in a 3-way call.
Second Dial Tone
TonePattern Poly Tone Pattern Script. 385-18,484-18;20 (n = 1)
400-18,425-18;20 (n = 2)