Parameter Reference
69
ITSP Profile X (X = A, B, C, D, E, F, G, H)
ITSP profiles represent profiles for the service providers. Voice service profiles, described in the next set of
web pages, represent the profiles that bind your device to the service providers.
General Settings
The following configuration parameters are available on this page.
ITSP Profile X – General Web Page (X = A, B, C, D, E, F, G, H) Parameter Guide
Parameter Description Default Setting
ITSP Profile X – General (VoiceService.1.VoiceProfile.n. ) for X = A, B, …, H corresponding to n = 1, 2, …, 8,
respectively
Name Human-readable string to identify the profile
instance. Maximum length is 127 characters.
SignalingProtocol Signaling protocols for this ITSP. SIP
DTMFMethod Method to pass DTMF digits to peer device. Choose
from:
• Inband: DTMF tones are sent as inband audio
signal
• RFC2833: DTMF tone events are relayed per
RFC2833
• SIPInfo: DTMF tones are relayed with SIP INFO
request
• Auto: Method to use based on call setup
negotiation (either Inband or RFC2833 can be
negotiated).
Auto
InbandDTMFVolume DTMF tone volume when sending inband DTMF 15
X_UseFixedDurationRFC2
833DTMF
When relaying DTMF digit events on this trunk using
RFC2833, the RFC2833 RTP packets normally keep
streaming for as long as the digit is pressed. With this
option set to TRUE, the device sends only one RTP
digit event packet with a fixed duration of 150 ms
regardless how long the digit has been pressed.
False
X_FixedDurationRC2833D
TMP
The fixed duration (in ms) to use when
X_UseFixedDurationRFC2833DTMF is set to True.
16
DigitMap A digit map to restrict the numbers that can be dialed
or called with this service. Maximum length is 511
characters.
(1xxxxxxxxxx|<1>[2-
9]xxxxxxxxx|011xx.|
xx.)
STUNEnable Enables device to send a STUN binding request for
its RTP port prior to every call.
No
STUNServer IP address of domain name of the STUN Server to
use.
To Next Page
Loading...
