Parameter Reference
58
DaylightSavingTimeEnable Enables daylight saving time on the unit. Yes
DaylightSavingTimeStart Daylight Saving Time Start Date Format:
month/day/week/hh:mm::ss, where month = 1-12, day =
1-21, weedkay=0, 1-7 (0=special), hh = 0-23, mm = 0-59,
ss = 0-59.
If weekday = 0, daylight saving starts on the given
month/day. Otherwise, it starts on the weekday on or after
the given month/day if day > 0, or on the weekday on or
before the last-day-of-the-given-month+day+1 (note that
day = -1 equivalent to last day of the month).
Seconds can be omitted if the value is 0.
Minutes and seconds can be omitted if both values are 0.
3/8/7/2
DaylightSavingTimeEnd Daylight Saving Time End Date. Same format as
DaylightSavingTimeStart.
11/1/7/2
DaylightSavingTimeDiff Amount of time to add to current time during Daylighyt
Saving Time. Format: [-]hh:mm:ss.
Seconds can be omitted if the value is 0.
Minutes and seconds can be omitted if both values are 0.
1
DHCP Client Settings (X_DHCPC.)
ExtraOptions Comma-separated list of extra DHCP options to be
requested. Choice of:
• 42
• 66
• 150
• 159
• 160
• 161
66, 42
DNS Control (X_DNScontrol.)
DNSQueryOrder When more than one DNS servers are available, the unit
attempts to resolve a domain name by querying each
server sequentially until a successful result is received.
The parameter controls the order in querying the servers.
Choose from:
• DNS Server1, DNS Server2, DHCP Offered
DNS Servers
• DHCP Offered DNS Servers, DNS Server1,
DNS Server2
DNS Server1,
DNS Server2,
DHCP Offered
DNS Servers
WAN Settings
Parameter Description Default Setting
To Next Page
Loading...
