Poly VVX D230 - Page 93

Parameter Reference
92
DigitMap Restricts the numbers that can be dialed
or called from the handset. If the caller
dials a number that isn’t allowed by the
digit map, the device plays a SIT tone
followed by a short error message to let
the caller know that the dialed number is
invalid.
([1-9]x?*(Mpli)|[1-9]S9|
[
1-9][0-9]S9|911|[67]XX|*
*
0|***|#S4|#[0-8]|#9x|
**81(Mbt)|**82(Mbt2)|**1
(
Msp1)|**2(Msp2)|**3(Msp3
)
|**4(Msp4)|**9(Mpp)|(Mpl
i
))
OutboundCallRoute After the caller dials a number that is
acceptable according to the DigitMap,
the device uses this outbound call routing
rule to determine that service to make
this call with. If no appropriate call route is
found, the device plays a SIT tone
followed by a short error message to let
the caller know that there is no call route
to place the call.
{([1-9]x?*(Mpli)):pp},{#
0
:ao},{#1:dt1},{#2:dt2},{
#
3:dt3},{#4:dt4},{#5:dt5}
,
{#6:dt6},{#7:dt7},{#8:dt
8
},{#*:dt1,dt2,dt3,dt4,dt
5,dt6,dt7,dt8},
{(<6:park>XX<;s=1>):pk},
{
(<7:pickup>XX<;d=0>):pk}
,
{(<**82:>(Mbt2)):bt2},{(
<
**81:>(Mbt)):bt},{**0:aa
}
,{***:aa2},
{(<**1:>(Msp1)):sp1},{(<
*
*2:>(Msp2)):sp2},{(<**3:
>
(Msp3)):sp3},
{(<**4:>(Msp4)):sp4},{(<
*
*9:>(Mpp)):pp},{(Mpli):p
l
i}
OutboundServices List of services available for dialing out.
sp1,pp
Handsetn Settings Parameter Guide (n = 1, 2, ..., 9, 10)
Parameter Description Default Setting