Polycom KIRK Wireless Server 8000 User Manual

Polycom, Inc. 18
System Configuration General System Settings
To Allow or Disable Subscriptions
1 From the System menu, go to Configuration and on the System
Configuration page choose one of the following options:
a Allowed-wildcard (default option) : KIRK Wireless Server 8000 will
autocreate a new user with the corresponding IPEI number for the
handset. By default the created user will be disabled. To configure the
user fill in the corresponding values in Create or Change User (see”
“section) window and make sure you select Allow from the Service
Status drop-down list.
b Allowed- users can be subscribed to the system.
c Disallowed- users cannot be subscribed to the system.
2 Click Save to write the change to the system.
Figure 4-4 Allowing subscriptions settings
Allowing KIRK Wireless Server to Route MSF between Handsets Internally
without Involving 3
rd
Party Application
This option enables KIRK Wireless Server 8000 to route messages internally
between handsets without involving a 3
rd
Party application.
To Allow KIRK Wireless Server to Route MSF between Handsets Internally without
Involving 3
rd
Party Application
1 From the System menu, go to Configuration and on the System
Configuration page under Allow KIRK Wireless Server to route MSF
between handsets internally without involving 3
rd
party applications
section, click Enabled or Disabled.
2 Click Save write the changes to the system.
Figure 4-5 Allowing KIRK Wireless Server to Route MSF between Handsets Internally
without Involving a 3
rd
Party Application

Polycom KIRK Wireless Server 8000 Specifications

General

Brand	Polycom
Model	KIRK Wireless Server 8000
Category	Server
Language	English