Polycom KIRK Wireless Server 8000 - Changing EMD Protocol Access Password

Polycom KIRK Wireless Server 8000 & KIRK Wireless Server 2500 Configuration Guide Network Settings
25 Polycom, Inc.
Figure 4-13 Setting Date and Time from Network
2 Select the Network radio box.
3 Type the NTP Server network address.
4 Select the desired Time Zone from the drop down list.
5 You can further configure the Posix Timezone String or else leave the
default value.
6 Click Save to write the NTP date and time to the system.
Changing EMD Protocol Access Password
To change the EMD protocol access Password (also known as “SIO password")
1 On the System menu, click Network.
Figure 4-14 Changing EMD Protocol Access Password
2 Under EMD protocol access Password, type the current password in the
Old Password field.
3 Type the new password in the New Password field, and then re-type it in
the Confirm New Password field.
4 Click Save to modify the password, and then click Close.