Polycom KIRK Wireless Server 8000 - Network Settings; Setting Date and Time

Polycom, Inc. 24
Network Settings General System Settings
Network Settings
This section includes the following information:
• ‘Setting Date and Time’
• ‘Changing Web Login Password’
• ‘Changing EMD Protocol Access Password’
• ‘Setting the IP Address’
Setting Date and Time
You can choose whether to read date and time from the KIRK Wireless Server
8000 or KIRK Wireless Server 2500 or whether to use the date and time from
your PC, and write it to the system. You also have the option to take the time
information from a NTP server.
To set date and time manually
1 On the System menu, click the Network tab.
Figure 4-12 Setting Date and Time Manually
2 Select the Manual radio box.
3 Click the Date box and choose the date from the calendar displayed.
4 Specify the Time.
5 Click Read from PC to read the date and time from the PC or click Read
from KWS to read the date and time from the KIRK Wireless Server.
6 Click Save to write the date and time to the system.
To set date and time from the network
1 On the System menu, click the Network tab.
Note
Click the Refresh button to read the settings from the system.