Polycom KIRK Wireless Server 8000 User Manual

Polycom, Inc. 36
System Restart General System Settings
3 a. Click Browse...to load the firmware file, select Auto Burn check-box and
click Load Server Firmware; the flash file starts loading and when it
iscompletely loaded it will turn into KIRK Wireless Server, automatically.
-or-
b. 1. Click Browse...to load the firmware file; if Auto Burn check-box is not
selected, then click the Load Server Firmware button; the firmware file
starts loading.
2. When loading has completed, click the Burn Server Firmware button
in order to flash the firmware.
Figure 4-22 Server firmware update
System Restart
Some configuration changes require a restart in order to take effect. A reset
restarts the KIRK Wireless Server 8000 software.
You must restart the system after the following procedures:
• configuring
• uploading configuration data
• uploading firmware
To Restart the System
1 On the System menu, click Restart.
2 From the Select restart type drop-down list, select the desired option and
then click Restart. A new window asking if you want to restart the system
is displayed.

Polycom KIRK Wireless Server 8000 Specifications

General

Brand	Polycom
Model	KIRK Wireless Server 8000
Category	Server
Language	English