Polycom, Inc. 68
MSF Messages (Message Service Function) System Management
2 From the Broadcast Type drop-down list select if you wish to send the
message to All, Single PP or to a Group.
3 In the Repetitions field, specify the number of times you wish the
broadcast to be resent.
4 (Only if the selected broadcast type is Single PP) In the PP Receiver Id
(Direct number), specify the number where you wish to send the message.
5 From the Discriminator drop-down list select the pattern for displaying
the message.
6 In the Text (max 19 characters) field, type the message you wish to send.
7 Click Broadcast Request to send the message.
8 Select the Monitor check box to receive a status on both the sent and
received messages or deselect the Monitor check box if you wish to receive
status only on the sent messages.
9 Click Clear to clean the Monitor window (optional).
PP Hardware Extension
To Configure the Sensors of the Handset and Receive Alarms using KIRK Wireless
Server 8000 or KIRK Wireless Server 2500
1 On the menu window of the WEB page, click the Apps. Demo tab and
then click PP Hardware Extension tab.
Figure 6-9 PP Hardware Extension tab
To Next Page
Loading...
