Name: Polycom KIRK Wireless Server 8000
Brand: Polycom
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Polycom, Inc. 116

Updating Software Manually

The following procedure describes how you update the KIRK Wireless Server

8000 or KIRK Wireless Server 2500 software manually if the default update

procedure fails.

Prerequisites.

• Kirk serial cable.

• PC with HyperTerminal installed.

To Update Software Manually

1 Set the HyperTerminal to 115200, 8 data, no parity, 1 stop bit and no flow

control.

2 Select a free com port, and then connect the KIRK serial cable between the

com port on the pc and the serial port on the KIRK Wireless Server 8000 or

KIRK Wireless Server 2500.

3 Power on the KIRK Wireless Server 8000 or KIRK Wireless Server 2500

system. The following the terminal window is displayed.

Questions and Answers:

Need help?

Do you have a question about the Polycom KIRK Wireless Server 8000 and is the answer not in the manual?

Polycom KIRK Wireless Server 8000 Specifications

General