Polycom KIRK Wireless Server 8000 & KIRK Wireless Server 2500 Configuration Guide MSF Messages (Message Service Function)
63 Polycom, Inc.
MSF Messages (Message Service Function)
From the Apps. Demo tab you can send MSF messages and events to any MSF
compatible handset connected to the KIRK Wireless Server 8000 or KIRK
Wireless Server 2500. Also, any MSF-compatible handset connected to the
KIRK Wireless Server 8000 or KIRK Wireless Server 2500 can send MSF
messages and events to the KIRK Wireless Server 8000 or KIRK Wireless Server
2500.
You can send several types of MSF messages and events:
• Normal MSF - A normal MSF message is sent to each individual handset at
a time, and a confirmation is sent when the handset has received the
message.
• MSF Format III - An MSF Format III message can be sent to a handset, a
group of handsets or to all handsets at a time, and a confirmation is
received.
• MSF Broadcast - A broadcast message can be sent to a large number of
users at the same time, but there is no confirmation from the individual
handsets.
• PP Hardware Extension - It is used to configure the sensors of the handset
and receive alarms.
• Call Control - It is used for call configurations.
• Temp Standby Text - It is used to change the standby text on the handset
display.
Normal MSF
To Send Normal MSF Messages from KIRK Wireless Server 8000 or KIRK Wireless
Server 2500 to a Handset
1 On the menu window of the WEB page, click the Apps. Demo tab and
then click Normal MSF.
Note The MSF Demo tabs are only a demo of messaging services that
demonstrates the capacity of the messaging API. The API is intended to be
used by a third-party application, such as an alarm server.
Note MSF Format III is only supported on 60- and 70- Handset Series.
Note PP Hardware Extension is only supported on 6040 and 7040 Handsets.
To Next Page
Loading...
Need help?
General
