Polycom, Inc. 50
Analogue Settings System Management
Figure 6-2 List Analogue Settings dialog
3 Make the desired changes and click Save. The following message is
displayed: ‘Analogue card settings updated successfully’. Click OK to
close.
4 Click Use all settings on all cards if you want to apply the settings for all
the cards.
For each slot in a shelf the following information is displayed.
Table 6-1 Analogue Settings
Parameter Details Description
Ringer Maximum frequency Lists the maximum ringer
frequency
Minimum frequency Lists the minimum ringer
frequency
Number of periods Specifies the number periods
To Next Page
Loading...
