Polycom KIRK Wireless Server 8000 User Manual

Polycom, Inc. 52
Analogue Settings System Management
ECAN State (On/Off) Specifies whether echo
cancellation is enabled or
disabled.
NLP State (On/Off) Specifies whether the
non-linear processor is
enabled or disabled.
Mode:
• Limits the signal when it
is active
• Reserved
• Sends sign noise when it
is active
• Sends white noise when
it is active
Determines type of comfort
noise that is used.
CPT (Call
Progress
Tone)
Busy low frequency The minimum frequency of
the range within which CPT is
detected.
Busy high frequency The maximum frequency of
the range within which CPT is
detected.
Busy tone on time (ms) Specifies the length of time
the tone is heard.
Busy tone pause time (ms) Specifies the length of time
between audible tones.
Dial low frequency (Hz) The minimum frequency of
the dial tone range.
Dial high frequency (Hz) The maximum frequency of
the dial tone range.
Dial tone on time (ms) Specifies the length of time
the tone is heard.
Dial tone pause time (ms) Specifies the length of time
between audible tones
Detect tolerance (ms) Specifies detect tolerance for
both busy tone pause and
dial tone pause.
IWU Gain Tx(dB) The transmitter gain in dB.
Rx (dB) The receiver gain in dB.
Table 6-1 Analogue Settings
Parameter Details Description

Polycom KIRK Wireless Server 8000 Specifications

General

Brand	Polycom
Model	KIRK Wireless Server 8000
Category	Server
Language	English