Polycom realpresence 1800 - Procedure 4: Connect to the Collaboration Server

Appendix G - Configuring Direct Connections to the Collaboration Server
Polycom®, Inc. 987
Procedure 4: Connect to the Collaboration Server
To Connect using the RMX Manager:
To use the browser:
» In the browser’s command line, enter http://<MCU Control Unit IP Address>/RmxManager.html
and press Enter.
To use the Windows Start menu:
1 Click Start.
a If the RMX Manager is displayed in the Recently used programs list, click RMX Manager in the
list to start the application.
or
b Click All Programs.
The All Programs list is displayed.
2 Select Polycom and then select RMX Manager.
The RMX Manager – Welcome screen is displayed.