Additional Conferencing Information
Polycom®, Inc. 220
To disable/enable the automatic muting of noisy endpoints in the Conference Profile:
1 In a new or existing Conference Profile, click the Audio Settings tab.
In new Profiles, the Auto mute noisy endpoints check box is selected by default.
In existing profiles (after software upgrade from a version prior to 8.1), the Auto mute noisy
endpoints check box is cleared.
2 To enable the automatic muting of noisy endpoints, click the Auto mute noisy endpoints check
box.
3 Click OK.
Automatic Muting of Noisy Endpoints at the MCU Level
You can disable the automatic muting of noisy endpoints at the MCU level by changing the
ENABLE_SELECTIVE_MIXING flag setting to NO.
In such a case, the automatic muting of noisy endpoints at the conference level (in the Conference Profile
- Audio Settings dialog box) is disabled.
To modify the system flag setting:
● To modify ENABLE_SELECTIVE_MIXING flag setting to NO, manually add it to system.cfg file and
set its value to NO.
For more details, see the Modifying System Flags.
To Next Page
Loading...
