Polycom®, Inc. 1071
Appendix J - Restore Defaults
Administrators can erase the current Collaboration Server configurations and restore default system
settings. Two options are available:
● Standard Restore
Delete customer conferencing entities and keep only system default conferencing entities. However,
the management network service and license info are not deleted.
● Comprehensive Restore
Restore the MCU to the settings it had when shipped from the factory. The Default Management
Network and license information are deleted and the system hard disk file partition is formatted.
Perform a Standard Restore
A standard restore deletes the following files:
● CDR
● Address Book
● Log Files
● Faults
● Dump Files
● Notes
In addition, all the conferencing entities are deleted:
● Entry Queues
● Profiles
● Meeting Rooms
● IVR Services
● Default Network IP Service
When the system is restarted, these conferencing entities are created based on the system defaults. In
addition, the Fast Configuration Wizard runs automatically, enabling the user to configure the Default IP
Network Service.
To Next Page
Loading...
