IP Network Services
Polycom, Inc. 515
Ethernet Settings
The automatically identified speed and transmit/receive mode of each LAN port used by the system can be
manually modified if a specific switch requires it. These settings can be modified in the Ethernet Settings
dialog box.
When updating the parameters of the SIP Server in the IP Network Service - SIP Servers dialog
box, the Collaboration Server must be reset to implement the change.
Physical Mapping - Port Type to Label on RealPresence Collaboration Server 4000
Port Type Annotation on MCU
Media LAN 2 RTM LAN Card
Modem LAN 1
RTM-IP 4000 Card
Management 1 LAN 2
Signaling 1 LAN 3
ShM LAN 6
To Next Page
Loading...
