Conference and Participant Level Operations
Polycom, Inc. 403
3 Using the Up/Down arrow keys, select the participant to be disconnected and then press the Right
arrow or # key to confirm your selection.
or
Press the Numeric Key on the Remote Device corresponding to the participant entry.
Terminating a Conference
To terminate a conference:
1 Use the Up/Down arrow keys to navigate to the second page of the Main Menu
2 Use the Up/Down arrow keys to select Terminate Conference and then press the Right arrow or #
key to confirm your selection.
or
Press the 8 key on the Remote Device.
The Terminate Conference sub menu is displayed.
3 Press the Right arrow key to confirm termination of the conference.
or
Press the Left arrow key to cancel termination of the conference.
Although this function can be accessed and viewed by chairpersons using PCM with ISDN
endpoints, conference termination cannot be executed.
To Next Page
Loading...
