Meeting Rooms
Polycom®, Inc. 273
Creating a New Meeting Room
To create a new meeting room:
● In the Meeting Rooms pane, click the New Meeting Room button or right-click an empty area
in the pane, and select New Meeting Room.
The New Meeting Room dialog box is displayed.
The definition procedure is the same as for the new conference (with the exception of Reserved
Resources for Audio and Video participants in Collaboration Server 2000/4000 only).
Microsoft Lync users can connect a Collaboration Server Meeting Room to a conference running on
the Microsoft A/V MCU. This allows Collaboration Server Lync users to connect with a conference in
progress on the A/V MCU and be an active participant in the conference.
Microsoft Lync is not supported by Collaboration Server (RMX) 1800 with no DSP cards.
For more information, see Connecting a Collaboration Server Meeting Room to a Microsoft AV-MCU
Conference.
If SIP Factories are being used do not assign a Meeting Room the ID 7001. This ID is reserved for
the default SIP Factory.
To Next Page
Loading...
