Additional Conferencing Information
Polycom®, Inc. 201
In the example below, all indication types are selected, and indicate 10 audio and 14 video participants.
In addition this figure demonstrates the order of the Layout Indications, which are ordered from the outside,
towards the inside as follows:
● Recording indication
● Audio participant indication
● Video participant indication
● Network quality indication
Setting Layout Indication via User Interface
● Audio/video participants indication appearance, is dependent on selecting the appropriate
check-boxes in the Conference Profile Properties > Layout Indications tab.
● Indications may appear permanently, or for a short duration upon an endpoint joining or disconnecting
the conference, for the specified duration, all depending on the Collaboration Server user
configuration in that tab.
Note that when the audio participant indication is set to display permanently, it is displayed only if
audio participants are connected to the conference.
● The position of the icon can be customized, as shown in the figure below:
Backwards Compatibility
Conferences launched using Profiles that were defined in versions that do not include the Layout
Indications tab will behave as if all the parameters in the tab are unchecked.
To Next Page
Loading...
