Conference and Participant Level Operations
Polycom, Inc. 398
The Participants Mute/Status sub menu is displayed.
The sub menu displays the Muted, Blocked and Video Suspended status of all participants’
endpoints. ALL can be selected to mute and unmute all participant endpoints with the exception of
the conference chairperson and lecturer.
2 Use the Up/Down/Left/Right arrow keys to select a Mute, Block or Suspend status icon.
3 Use the Zoom In key to toggle the state of the audio and video channels of the participants’
endpoints.
The status icons are summarized in the table below.
Far End Camera Control
This function is not available to chairpersons using PCM with ISDN endpoints.
The endpoint to be controlled must support Far End Camera Control (FECC).
Participants Mute/Status - Icons
Status
Icon Description
Audio output from this endpoint is allowed. Other conference participants can hear the audio
from this endpoint.
The endpoint is muted. Other conference participants will not hear audio from this endpoint.
The audio input to this endpoint is allowed. This endpoint can hear the conference audio.
The audio output to this endpoint is blocked. This endpoint cannot receive the conference
audio.
Video output from the endpoint is allowed. Other conference participants can see video from
this endpoint.
Video output from the endpoint is suspended. Other conference participants cannot see video
from this endpoint.
The endpoint is neither muted nor blocked.
The endpoint is both muted and blocked.
To Next Page
Loading...
