Conference and Participant Level Operations
Polycom, Inc. 399
Using the arrow keys of the remote control device, the chairperson can control the direction, zoom and focus
of a remote endpoint’s camera.
To control a far camera:
1 Use the Up/Down arrow keys to select Camera Control in the Main Menu and then press the Right
arrow or # key to confirm your selection.
or
Press the 4 key on the Remote Device.
The Camera Control sub menu is displayed.
2 Use the Up/Down/Left/Right arrow keys to select the far camera to be controlled.
A colored frame is displayed around the selected cell in the video layout.
3 Use the Zoom In key to activate FECC.
Following a 10 second delay, the FECC active icon ( ) is displayed in the video image of the
selected site.
If no camera control keys are pressed on the Remote Control Device within a period of 5 seconds,
the previous menu (Camera Control) menu is automatically displayed.
4 Use the Up/Down/Left/Right/Zoom In/Zoom Out arrow keys to control the remote camera.
5 Use the Zoom Out key on the remote control to return to the PCM Main Menu.
To Next Page
Loading...
