Polycom realpresence 1800 - Adding a New User

Users Connections and Notes
Polycom®, Inc. 481
The list includes three columns: User Name, Authorization Level and Disabled:
 User Name - The login name used by the user to connect to the MCU.
 The Authorization - Indicates the Authorization Level assigned to the User: Administrator,
Administrator Read-only, Operator, Chairperson or Auditor.
 Disabled - Indicates whether the user is disabled and cannot access the system unless enabled
by the administrator. For more details, see Disabling a User.
Locked indicates whether the user has been locked out and cannot access the system unless
enabled by the administrator.
In Ultra Secure Mode (ULTRA_SECURE_MODE=YES), Users can be automatically disabled or
locked out by the system when they do not log into the Collaboration Server application for a
predefined period or if their login session does not meet Enhanced Security requirements. Users can
be manually disabled by the administrator. For more details, see Notes.
Adding a New User
Administrators can add new users to the system.
To add a new user to the system:
1 In the RMX Management pane, click Users ().
2 The Users pane is displayed.
The User Name and Password must be in ASCII.