Ultra Secure Mode
Polycom, Inc. 816
5 Click OK.
6 The Username and Password dialog box is displayed.
7 Enter the default Username —POLYCOM and default Password —POLYCOM.
8 Click OK.
Enable Ultra Secure Mode
The Ultra Secure Mode is disabled by default and can be enabled by adding the ULTRA_SECURE_MODE
System Flag and setting its value of to YES using the Setup > System Configuration menu. Doing so
affects the ranges and defaults of other System Flags that control:
● Network Security
● User Management
● Strong Passwords
● Login and Session Management
● Cyclic File Systems alarms
For a detailed description of the installation and configuration of an MCU in a Maximum Security
Environment see First Time Installation and Configuration in the RealPresence Collaboration Server (RMX)
1800/2000/4000 Deployment Guide for Maximum Security Environments.
To Next Page
Loading...
