Sharing Content During Conferences
Polycom®, Inc. 137
Exclusive Content Mode
In this mode, the MCU prevents participants other than the current content sharer, from sharing content.
Exclusive content may be limited to the lecturer, as described below.
To modify exclusive content mode by granting (or canceling) of token ownership, see Giving and Canceling
Token Ownership (AVC Participants)).
Guidelines for Sharing Content in Exclusive Content Mode
● Exclusive Content Mode is available in all conferencing modes.
● Exclusive Content Mode is enabled or disabled (system default) by a check box in the Conference
Profile - Advanced tab, or during an ongoing conference using the Conference Properties -
Advanced tab.
● In Exclusive Content Mode, when the RESTRICT_CONTENT_BROADCAST_TO_LECTURER
system flag is set to:
NO - The first participant to send content becomes the Content Token holder, and releasing the
Content Token allows other participants to acquire the token, and begin transmitting content.
YES - Only the designated Lecturer can be the Content Token holder.
● The Exclusive Content Mode check box replaces the EXCLUSIVE_CONTENT_ MODE system flag
used in previous versions to control exclusive content mode for the system.
● In Exclusive Content Mode, an endpoint attempting to send content after another endpoint starts
sending content, is rejected with a momentary content interruption.
To Next Page
Loading...
