Users Connections and Notes
Polycom®, Inc. 483
Changing a User’s Password
Users with Administrator authorization can change their own password and other users’ passwords. Users
with Operator authorization can change their own password.
To change a user’s password:
1 In the RMX Management pane, click Users ().
2 Right-click the user and click Change User Password.
The Change Password dialog box opens.
3 Enter the Old Password (current), New Password and Confirm the New Password.
4 Click OK.
The user’s password is changed.
Disabling a User
An administrator can disable an enabled user. An indication is displayed in the Users List when the User is
disabled. An administrator can enable a disabled User.
To disable a user:
1 In the RMX Management pane, click Users ().
The Users pane is displayed.
2 In the Users pane, right-click the user to be disabled and select Disable User in the menu.
A confirmation box is displayed.
3 Click YES.
The User status in the Users list - Disabled column changes to Yes.
Enabling a User
An administrator can enable a User who was disabled automatically by the system (in the Ultra Secure
Mode) or manually by the administrator.
The Password must be in ASCII.
To Next Page
Loading...
